Hello, Welcome to Aifiber
+86 755-8256-2175
100G MTP/UPC to 12Duplex LC/UPC,OM4 50/125um Multimode,Fiber Optic Fan out Patch Cord, Used in high density for large data center

100G MTP/UPC to 12Duplex LC/UPC,OM4 50/125um Multimode,Fiber Optic Fan out Patch Cord, Used in high density for large data center

P/N: 24MTPmLC-OM4P

By installing and utilizing MPO MTP® multi fiber, it is well suited for data center where the room is restricted and also easy to manage the fibers What is more, Now AIFIBER supplies MPO MTP® solution for 10G,40G,100G networking in order to meet the rapid development and configuration of high bandwidth infrastructures

Share: share to Facebook   share to Twitter
Description
 
AIFIBER offers a lot varieties MPO MTP® Patch cords equipped with Trunk,breakout, Harness/Fan-out cable(singlemode OS1/OS2,multimode OM1/OM2/OM3/OM4).These patch cables are available with either 12fiber MPO MTP® or 24 fiber MPO MTP®,so MPO MTP® trunk cable has 12,24,48,72,96,144fbier options,these polarity (A,B,C) and gender( Female and Male )depends on the network interface. AIFIBER uses precision MT ferrules(Singlemode PC/APC,Multimode PC )together with metal guide pins and housing assemblies to ensure fiber alignment when mating.


Applications
 
Data Center
QSFP Devices
LAN/SAN switch Equipment Distribution Area(EDA)
High Density optical laser
 
 
Features
 
High fiber density
Insert/pull latching connector
Lower installation cost
High compatibility, flexibility& system performance


Specification

a. MTP 
 ® Connector

 
MTP ® Connector
Standard
SM MT
Ferrule
Elite
SM MT
Ferrule
Standard
MM MT
Ferrule
Elite
MM MT
Ferrule
Polish APC APC UPC UPC
Insertion Loss(dB) Typical 0.25 0.10 0.25 0.10
Maximum 0.30 0.30 050 0.30
Return Loss(dB) 50 60 30 30
Operating Temperature(℃) -40~+80
Storage Temperature(℃) -40~+80


b.MPO Connector 

MPO Connector Standard
SM MT Ferrule
Low Loss
SM MT Ferrule
Standard
MM MT Ferrule
Low Loss
MM MT Ferrule
Polish UPC APC UPC APC UPC UPC
Insertion Loss(dB) Typical 0.5 0.5 0.3 0.3 0.5 0.3
Maximum 0.7 0.7 0.5 0.5 0.7 0.5
Return Loss(dB) 45 60 60 45 20 20
Exchangeability(dB ) ≤0.3
Durability(dB) <0.2(500Matings,per EIA-455-21A)
Tensile Strength(dB) ≤0.3(Max 66N)
Operating Temperature (℃) -20~+60
Storage Temperature(℃) -40~+80















 
Associated Standards
* Meets IEC Standard 61754-7 and TIA/EIA 604-5 Type MPO
* Structured cabling per TIA-568-C
* Parallel Optics
- Optical Internetworking Forum (OIF) Compliant
- Infiniband Compliant
- 10G Fiber Channel Compliant
- 40G and 100G IEEE 802.3
- SNAP 12
- POP 4
- QSFP


LC,SC Connector
a. Multimode OM1/OM2/OM3/OM4    0.2dB(IL Max)  35dB(RL Min)
b. Singlemode OS1/OS2             0.2dB(IL Max)   55dB( RL Min)
100G MTP/APC Male to 12Duplex LC/UPC Multimode OM4 50/125um Optic Fiber Fanout Patch Cord Drawing